Tools have been part of human life for thousands of years. A hammer, for example, helps us straighten a bent nail.
A hand-operated straightening unit is a tool that uses rotating straightening rollers for the straightening process; these rollers are arranged in two staggered rows and subject a finite length of workpiece to alternating elastic-plastic deformation. The result is a manually straightened section of workpiece. Our SPR series straightening units, featuring 5 and 7 straightening rollers, offer high power density and excellent handling.
The elastic-plastic deformation of long process material sections or long goods is often necessary at various types of construction sites. In place of the simple hammer, the use of hand-held straighteners is recommended.
These supply the force and torque required to straighten the process material in a through-feed process, without changing the material’s cross-sectional geometry. It doesn’t matter whether the tool or the workpiece is fixed in place. The form curve of the process material changes over the length if there is a relative movement between the tool and the workpiece, and the straightening rollers are positioned relative to one another. The benefits of a through-feed method compared with discontinuous straightening by means of three-point bending are improved manufacturing quality and higher throughput.
The HS 5-4.0 handheld straightening unit can be used for process material dimensions ranging from 1 mm to 4 mm. The machine has 5 rotatable tools arranged in two rows of rollers, which can be positioned parallel to one another. Instead of straightening rollers, straightening discs with a radius groove are used. HS 5-4.0 hand straightening units are widely used, among other things, in the processing of strands and ropes. It is also possible to straighten individual wires and strands after the strand or rope assembly has been unraveled.